Apple Watch Stuck on Apple Logo? 5 Fixes That Work

For various reasons, sometimes Apple Watch stuck on the Apple logo. Thankfully, we have the solutions to your troubles if it’s a software issue because little problems are common with wearable device.

You can continue to use your Watch generally once it has passed the Apple logo. So, in this article, we will tell you How to fix apple watch stuck on the Apple logo.

Why is my apple watch stuck on the apple logo?

Many people ask “why is my apple watch stuck on the apple logo?”

Let’s look at the various causes of the problem before moving on to the viable techniques and methods for troubleshooting the watchOS device.

To begin with, the issue could be the result of a botched software update. Another factor that could cause this problem is congested storage.

If your Apple iwatch stuck on the apple logo, aside from these two apparent causes, your Apple Watch could be stuck on the Apple logo due to a random software glitch. We’ve come up with some fixes to the problem with this wearable device after considering all of the likely causes.

Before We Begin

I was surprised when it took my Apple smartwatch to switch on when I initially got it. Initially, my Apple Watch stuck on the Apple logo on a few occasions when all I had to do was to wait a bit longer.

If your Apple Watch has been frozen for several minutes on the Apple logo, it is most likely frozen. After the Apple logo displays on display, don’t be shocked if your Apple Watch takes a minute to switch on. And if you got an iPhone and have a same problem, here is how to fix iPhone stuck on Apple logo.

5 Ways to fix Apple watch stuck on Apple logo

1. Hard Reset Your Apple Watch

When your Apple Watch stucks on the Apple logo, it’s usually because its software crashed during powering on and it’s frozen. Now the question comes How to fix apple watch stuck on the Apple logo? We can restart a frozen Apple Watch by executing a hard reset, which causes the device to turn off and on abruptly.

To hard reset your Apple Watch, press and hold the Digital Crown and the Side button simultaneously. When the Apple logo displays in the centre of the Apple Watch face, release both buttons.

Another answer to How to fix Apple watch stuck on Apple logo is to press both buttons for 15-30 seconds before seeing the Apple logo. You may have to wait a few minutes after hard resetting your Apple smartwatch before it comes back on.

That’s fantastic if the hard reset cured your Apple Watch! However, it’s crucial to note that a hard reset is nearly always only a temporary solution. When your Apple Watch stops or becomes stuck on the Apple logo, it’s usually due to a more serious software issue.

You can reset your Apple Watch every time it freezes on the Apple logo, but we’d instead show you how to prevent this from happening again!

I Hard Reset My Apple Watch, But It’s Still Stuck On The Apple Logo!

Before I go any further with the hard reset, I’d like to talk about solutions when apple iwatch stuck on apple logo after you’ve done it.

If you have an Apple Watch and have encountered this glitch, you can generally get it off the Apple logo screen by utilizing the Find My Apple Watch feature in the Watch app on your iPhone.

Open the Watch app and go to the My Watch tab to access the My Watch tab. Then, at the top of this menu, touch on the name of your Apple smartwatch. Tap the information button (a circle with an I in it), then Find My Apple Watch.

After tapping Find My Apple Watch, you’ll be prompted to enter into Find My iPhone with your Apple ID. Then, in the list of your devices, touch on your Apple Watch.

Finally, select Actions -> Play Sound from the drop-down menu. After playing a ringing sound, your wearable device should no longer be stuck on the Apple logo. You may need to touch Play Sound multiple times for this step to function.

2. Unpair your Apple Watch and pair it again

It’s an excellent idea to unpair and pair the Watch once it’s no longer stuck on the Apple logo. This may aid in the prevention of future problems.

Our guide covers how to pair and unpair Apple Watch in depth.

Also, check here how to fix iPhone stuck on headphone mode.

3. Update to the latest watchOS

Apple aims to correct pre-existing faults while introducing new capabilities with each software release. If you’re having trouble with your Apple Watch, make sure you’re running the most recent version of watchOS.

To set your Apple iWatch when apple iwatch stuck on apple logo, you can update your wearable device directly from it, or you can take these steps:

On the iPhone, open the Watch app and select My Watch.

Select General Software Update from the drop-down menu.

4. Factory reset your Apple Watch

This is time-consuming, but it solves several issues. The data on your Apple smartwatch will be deleted and reset to default settings when you factory reset it.

All programs, music, photographs, and settings will be deleted and reverted to their default settings. Here’s how to reset your Apple Watch to factory settings:

Tap Settings General with the Digital Crown.

Now, select Reset Erase All Content and Settings from the menu.

If prompted, enter your Watch passcode and confirm your action.

Set up your Watch as fresh once the erase is complete.

To keep the old problems from resurfacing, don’t restore them from a backup. After you’ve set up the Watch, you can download your favourite apps and sync your iPhone’s music and photographs.

Check here how to download unc0ver jailbreak.

5. Is there a hardware issue or water damage?

There are many possibilities if you are thinking why is my apple watch stuck on the apple logo? Is your Apple Watch prone to being dropped, or is it water damaged? If that’s the case, there’s a good possibility you’re dealing with some internal issues. You should contact Apple Support for this.

Similarly, if you suspect your Watch has been submerged in water for an extended period, bring it to an Apple Service Center.

We hope these methods helped resolve your Apple Watch’s startup Apple logo issue. Do you have any inquiries? Leave your question in the comments section.

If your watch is in good working order, check out these linked posts to get the most out of it.

Here is how to install Altstore on iPhone.

Conclusion:

If you haven’t been able to get your Apple Watch to stop showing the Apple logo, there’s a reasonable probability the issue is hardware-related. In this case, you’ll need to submit your Watch to a reputable Apple Watch repair shop.

Rapid Repair has been a renowned brand in providing fast and quality Apple Watch repair for numerous years. We are known as the most desired place for repairing Apple products, with a strong presence in all major cities.